When was Praed Street Junction built?
 

"Paul Cummins" wrote in message
...
In article ,
(John Rowland) wrote:

Was there any device to prevent broad
gauge trains attempting to go the wrong way?

I would suggest that the lack of rail
would have done the job most effectively.

No, that would have prevented broad gauge trains from *succeeding* in going
the wrong way. It wouldn't have stopped them from attempting and derailing,
if the points on the shared rail were wrongly set.

--
John Rowland - Spamtrapped
Transport Plans for the London Area, updated 2001
http://www.geocities.com/Athens/Acro...69/tpftla.html
A man's vehicle is a symbol of his manhood.
That's why my vehicle's the Piccadilly Line -
It's the size of a county and it comes every two and a half minutes

When was Praed Street Junction built?
 

"Clive D. W. Feather" wrote in message
...
In article , John Rowland
writes

Was there any device to prevent broad
gauge trains attempting to go the wrong way?

No broad gauge rail. The track would be something like this:

snip

Wow, thanks, that was service beyond the call of duty. All is now clear.

I've always wondered if you type these ASCII diagrams by hand or if you have
some program for doing them.

--
John Rowland - Spamtrapped
Transport Plans for the London Area, updated 2001
http://www.geocities.com/Athens/Acro...69/tpftla.html
A man's vehicle is a symbol of his manhood.
That's why my vehicle's the Piccadilly Line -
It's the size of a county and it comes every two and a half minutes

When was Praed Street Junction built?
 

In article , John Rowland
writes
I've always wondered if you type these ASCII diagrams by hand or if you have
some program for doing them.

By hand. Though I've now done enough that I have a good feel for how to
put them together. And vi is a very sharp tool.

--
Clive D.W. Feather | Home:
Tel: +44 20 8495 6138 (work) | Web: http://www.davros.org
Fax: +44 870 051 9937 | Work:
Please reply to the Reply-To address, which is:

When was Praed Street Junction built?
 

John Rowland:
Was there any device to prevent broad gauge trains attempting to go the
wrong way?

Clive Feather:
No broad gauge rail. The track would be something like this:

\ \ \
\ \ C\
\ \ \\------------
\ \ \--C
-------X-------\--------------
\
\
\
------------------------------
A

Irrespective of the setting of the points, the check rail C would
pull a broad-gauge axle around the curve.

Well, it would try to, but wouldn't the point at A try equally hard
to put the wheel on the wrong side of the rail? Or is there something
special about the bit of track on that side too?
--
Mark Brader "People with whole brains, however, dispute
Toronto this claim, and are generally more articulate
in expressing their views." -- Gary Larson

When was Praed Street Junction built?
 

In article , Mark Brader
writes
[...]
Irrespective of the setting of the points, the check rail C would
pull a broad-gauge axle around the curve.
Well, it would try to, but wouldn't the point at A try equally hard
to put the wheel on the wrong side of the rail? Or is there something
special about the bit of track on that side too?

Argh, you're right. Fixed points, with a gap where the blade is, works
to split the two gauges, but it doesn't work in conjunction with a
turnout. Back to the drawing board.

--
Clive D.W. Feather | Home:
Tel: +44 20 8495 6138 (work) | Web: http://www.davros.org
Fax: +44 870 051 9937 | Work:
Please reply to the Reply-To address, which is: