Home |
Search |
Today's Posts |
![]() |
|
London Transport (uk.transport.london) Discussion of all forms of transport in London. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Took a trip to King George V the other day, and was initially
surprised to see a very substantial concrete wall across the formation beyond the buffer stops, separating the operational DLR from the construction site. I would have expected a steel mesh fence of the type which normally surrounds construction sites. My initial thought was that it was there to protect the DLR from flooding in the event of a tunnel breach during construction, but the lie of the land suggested that the trackbed at that point was well above the normal river level. I can only think that, being east of the Thames Barrier, it's a temporary part of the Thames flood defences and will be removed when the barriers either side of the extension - on both sides of the river - are complete. Does that sound about right? Steve Adams |
#2
![]() |
|||
|
|||
![]() "Steve" wrote in message oups.com... Took a trip to King George V the other day, and was initially surprised to see a very substantial concrete wall across the formation beyond the buffer stops, separating the operational DLR from the construction site. I would have expected a steel mesh fence of the type which normally surrounds construction sites. My initial thought was that it was there to protect the DLR from flooding in the event of a tunnel breach during construction, but the lie of the land suggested that the trackbed at that point was well above the normal river level. I can only think that, being east of the Thames Barrier, it's a temporary part of the Thames flood defences and will be removed when the barriers either side of the extension - on both sides of the river - are complete. Does that sound about right? Is it what they call the 'launch chamber' for the tunnel boring machine? I believe the TBM has to initially jack itself forward towards the tunnel face, once its sufficiently far into the tunnel for the lining to be installed, it then moves forward against the lining IYSWIM. Paul |
#3
![]() |
|||
|
|||
![]()
On 20 Jun, 14:49, "Paul Scott" wrote:
Is it what they call the 'launch chamber' for the tunnel boring machine? I believe the TBM has to initially jack itself forward towards the tunnel face, once its sufficiently far into the tunnel for the lining to be installed, it then moves forward against the lining IYSWIM. Its too far away from the tunnel entrance for that. My guess is its just to keep dirt and noise out of the station as much as possible and to make it look a bit neater. Compared to the price of the extension as a whole the price of a 20 foot concrete wall is peanuts. B2003 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Disused railway tunnel under Regent Quarter, King's Cross | London Transport | |||
Richard Barnbrook forces Boris to Celebrate St George's Day | London Transport | |||
King George V | London Transport | |||
Bank to King George V "cabride" video on Google | London Transport | |||
President Bush Exposed - George W.Bush Talks Straight ? (Must SEE + HEARSPEECH) | London Transport |