OT - Cantilevered Barons Court Library
 

http://maps.google.co.uk/maps?hl=en&....4 6,,0,-3.17

This building has a tiny octagonal ground floor with no external access.
There is an external staircase and ramp up to the large octagonal first
floor which cantilevers out on all eight sides. The second floor is the same
size as the basement. A wire fence prevents anyone from walking under the
main floor, but the space inside the fence is unused, and the fence does not
support the weight of the first floor. Can anyone imagine why a library
might be cantilevered like this?

OT - Cantilevered Barons Court Library
 

On Jul 7, 2:31�am, "Basil Jet"
wrote:
http://maps.google.co.uk/maps?hl=en&...3,-0.206852&sp...

This building has a tiny octagonal ground floor with no external access.
There is an external staircase and ramp up to the large octagonal first
floor which cantilevers out on all eight sides. The second floor is the same
size as the basement. A wire fence prevents anyone from walking under the
main floor, but the space inside the fence is unused, and the fence does not
support the weight of the first floor. Can anyone imagine why a library
might be cantilevered like this?

I can only assume it was built that way so that it had level access
from North End Road, which is where the main entrance is, which level
is higher than the rear of the premises. I'd never seen it from the
rear until your helpful Google picture link!

Marc.

OT - Cantilevered Barons Court Library
 

" wrote:
On Jul 7, 2:31?am, "Basil Jet"
wrote:
http://maps.google.co.uk/maps?hl=en&...3,-0.206852&sp...

This building has a tiny octagonal ground floor with no external access.
There is an external staircase and ramp up to the large octagonal first
floor which cantilevers out on all eight sides. The second floor is the same
size as the basement. A wire fence prevents anyone from walking under the
main floor, but the space inside the fence is unused, and the fence does not
support the weight of the first floor. Can anyone imagine why a library
might be cantilevered like this?

I can only assume it was built that way so that it had level access
from North End Road, which is where the main entrance is, which level
is higher than the rear of the premises. I'd never seen it from the
rear until your helpful Google picture link!


There was a trend for building "on stilts" in the late 1950s, 1960s and
early 1970s, which seems to be when this library may have been built.

Before or after that period, an enclosed cellar would have been more
likely to be provided.

OT - Cantilevered Barons Court Library
 

wrote:
On Jul 7, 2:31?am, "Basil Jet"
wrote:
http://maps.google.co.uk/maps?hl=en&...3,-0.206852&sp...

This building has a tiny octagonal ground floor with no external
access. There is an external staircase and ramp up to the large
octagonal first floor which cantilevers out on all eight sides. The
second floor is the same size as the basement. A wire fence prevents
anyone from walking under the main floor, but the space inside the
fence is unused, and the fence does not support the weight of the
first floor. Can anyone imagine why a library might be cantilevered
like this?

I can only assume it was built that way so that it had level access
from North End Road, which is where the main entrance is, which level
is higher than the rear of the premises.

Thanks, but although that's a reason to put the entrance on the first floor,
it's no reason to cantilever a big first floor out from a tiny ground floor.

OT - Cantilevered Barons Court Library
 

"Basil Jet" wrote in message
...
wrote:
On Jul 7, 2:31?am, "Basil Jet"
wrote:
http://maps.google.co.uk/maps?hl=en&...3,-0.206852&sp...

This building has a tiny octagonal ground floor with no external
access. There is an external staircase and ramp up to the large
octagonal first floor which cantilevers out on all eight sides. The
second floor is the same size as the basement. A wire fence prevents
anyone from walking under the main floor, but the space inside the
fence is unused, and the fence does not support the weight of the
first floor. Can anyone imagine why a library might be cantilevered
like this?

I can only assume it was built that way so that it had level access
from North End Road, which is where the main entrance is, which level
is higher than the rear of the premises.

Thanks, but although that's a reason to put the entrance on the first floor,
it's no reason to cantilever a big first floor out from a tiny ground floor.


Possibly there was existing infrastructure, in the form of large gas mains ,
sewers, etc running underneath the site which they wanted to avoid when digging
the foundations. Hence as small a footprint as possible, for cost reasons.

The basement may originally have been intended for parking or storage perhaps
but the money ran out before they could build an access ramp. Again costs.

In the second case, maybe there was a change of administration during in the course
of the construction, with a period of belt tightening following the initial
euphoria.


michael adams

....

OT - Cantilevered Barons Court Library
 

On 7 July, 02:31, "Basil Jet"
wrote:
This building has a tiny octagonal ground floor with no external access.
There is an external staircase and ramp up to the large octagonal first
floor which cantilevers out on all eight sides. The second floor is the same
size as the basement. A wire fence prevents anyone from walking under the
main floor, but the space inside the fence is unused, and the fence does not
support the weight of the first floor. Can anyone imagine why a library
might be cantilevered like this?

Smaller foundation and therefore cheaper? A lot like Buckminster
Fuller's Dymaxion House concept:

http://www.bfi.org/images/content/fu...ax/dymax4d.png
http://en.wikipedia.org/wiki/Dymaxion_house

(having toured one - yes, the whole structure creaks as you move
around)

U

OT - Cantilevered Barons Court Library
 

Mr Thant wrote:
On 7 July, 02:31, "Basil Jet"
wrote:
This building has a tiny octagonal ground floor with no external access.
There is an external staircase and ramp up to the large octagonal first
floor which cantilevers out on all eight sides. The second floor is the same
size as the basement. A wire fence prevents anyone from walking under the
main floor, but the space inside the fence is unused, and the fence does not
support the weight of the first floor. Can anyone imagine why a library
might be cantilevered like this?

Smaller foundation and therefore cheaper? A lot like Buckminster
Fuller's Dymaxion House concept:

http://www.bfi.org/images/content/fu...ax/dymax4d.png
http://en.wikipedia.org/wiki/Dymaxion_house

(having toured one - yes, the whole structure creaks as you move
around)


Smaller doesn't always mean cheaper, as the smaller footprint usually
means that the foundation has to be immensely stronger in order to cope
with the forces that a more widespread foundation finds almost trivial
to deal with.

OT - Cantilevered Barons Court Library
 

Mr Thant wrote:

http://en.wikipedia.org/wiki/Dymaxion_house

(having toured one - yes, the whole structure creaks as you move
around)

Not as much as the Dymaxion map!
http://teczno.com/faumaxion-II/
(click and drag it)