One of the board papers for the 22nd Sept meeting is a four page summary of
the recently discussed incidents:

http://www.tfl.gov.uk/assets/downloa...-Incidents.pdf

Includes the Northern line Rail Grinding Train runaway, and it turns out a
previous incident on the Jubilee line with the same train! .

Also the Plaistow signalling irregularity, which was quickly found to have
been caused by 'a defective component'. Here they report that the train was
correctly back tripped, and ISTM this confirms that the 'trains on collision
course' scary headlines were indeed wrong, as both trains were stopped by
the signalling system.

"...checks have been undertaken and ensured that similar components are not
present at other sites potentially affected by modifications."

Interesting stuff...

Paul S

On 21 Sep, 16:54, "Paul Scott" wrote:
One of the board papers for the 22nd Sept meeting is a four page summary of
the recently discussed incidents:

http://www.tfl.gov.uk/assets/downloa...-LU-Safety-Inc...

Includes the Northern line Rail Grinding Train runaway, and it turns out a
previous incident on the Jubilee line with the same train! * .

"In the 20 July incident on the Jubilee line, the RGT failed for the
first time since its first use by TL on LU infrastructure in 2002. The
RGT was recovered using out-of-service Jubilee line passenger trains
to, first, propel and then, later, tow the RGT from West Hampstead to
Neasden Depot. This caused a number of difficulties and resulted in
serious delays to the Jubilee line service until around 10.20 hrs."

It would be interesting to know what the 'difficulties' were with the
recovery of the RGT after the first falure. It is a bit odd that
there should have been two failures within short period, given the
generally good reliability of the machine.

On Sep 21, 5:43*pm, Stephen Furley wrote:

On 21 Sep, 16:54, "Paul Scott" wrote:

One of the board papers for the 22nd Sept meeting is a four page summary
of the recently discussed incidents:

http://www.tfl.gov.uk/assets/downloa...-Incidents.pdf

Includes the Northern line Rail Grinding Train runaway, and it turns out a
previous incident on the Jubilee line with the same train! * .

"In the 20 July incident on the Jubilee line, the RGT failed for the
first time since its first use by TL on LU infrastructure in 2002. The
RGT was recovered using out-of-service Jubilee line passenger trains
to, first, propel and then, later, tow the RGT from West Hampstead to
Neasden Depot. This caused a number of difficulties and resulted in
serious delays to the Jubilee line service until around 10.20 hrs."

It would be interesting to know what the 'difficulties' were with the
recovery of the RGT after the first falure. *It is a bit odd that
there should have been two failures within short period, given the
generally good reliability of the machine.

Sounds as though whatever broke didn't then get fixed properly.

On 21/09/10 18:36, Mizter T wrote:

Sounds as though whatever broke didn't then get fixed properly.

Temporary repair pending arrival of a part maybe?

In either case, the first failure should have taught them "if this thing
breaks, we have problems recovering it, so in future, we need a plan for
recovering it" and that obviously didn't happen until the second
incident where the "make it up on the spot" plan failed so catastrophically.

Rgds

Denis McMahon

On Tue, 21 Sep 2010 10:36:28 -0700 (PDT), Mizter T
wrote:


On Sep 21, 5:43*pm, Stephen Furley wrote:

On 21 Sep, 16:54, "Paul Scott" wrote:

One of the board papers for the 22nd Sept meeting is a four page summary
of the recently discussed incidents:

http://www.tfl.gov.uk/assets/downloa...-Incidents.pdf

Includes the Northern line Rail Grinding Train runaway, and it turns out a
previous incident on the Jubilee line with the same train! * .

"In the 20 July incident on the Jubilee line, the RGT failed for the
first time since its first use by TL on LU infrastructure in 2002. The
RGT was recovered using out-of-service Jubilee line passenger trains
to, first, propel and then, later, tow the RGT from West Hampstead to
Neasden Depot. This caused a number of difficulties and resulted in
serious delays to the Jubilee line service until around 10.20 hrs."

It would be interesting to know what the 'difficulties' were with the
recovery of the RGT after the first falure.

Possibly mainly the bleedin' obvious[TM] as it was in daytime during
the week and passenger services would have been suspended in the
vicinity of the recovery and consequently elsewhere.

*It is a bit odd that
there should have been two failures within short period, given the
generally good reliability of the machine.

Sounds as though whatever broke didn't then get fixed properly.

On 21 Sep, 23:31, Charles Ellson wrote:

Possibly mainly the bleedin' obvious[TM] as it was in daytime during
the week and passenger services would have been suspended in the
vicinity of the recovery and consequently elsewhere.

I interpreted that differently, i.e. there was some expected
difficulty with the recovery, not just that the recovery caused
delays, which would, obviously, have caused delays.

On 21 Sep, 23:47, Stephen Furley wrote:

I interpreted that differently, i.e. there was some expected
difficulty with the recovery, not just that the recovery caused
delays, which would, obviously, have caused delays.

Sorry, I meant to say 'some UNexpected difficlty'

In message , at 23:31:41 on
Tue, 21 Sep 2010, Charles Ellson remarked:

"In the 20 July incident on the Jubilee line, the RGT failed for the
first time since its first use by TL on LU infrastructure in 2002. The
RGT was recovered using out-of-service Jubilee line passenger trains
to, first, propel

something obviously happened during the propelling

and then, later,

how much later, and why the delay?

tow the RGT from West Hampstead to Neasden Depot. This caused a
number of difficulties and resulted in serious delays

trying not to conflate difficulties and delays, so what were the
difficulties?

to the Jubilee line service until around 10.20 hrs."

It would be interesting to know what the 'difficulties' were with the
recovery of the RGT after the first falure.

exactly

Possibly mainly the bleedin' obvious[TM] as it was in daytime during
the week and passenger services would have been suspended in the
vicinity of the recovery and consequently elsewhere.

West Hampstead to Neasden is only 3 miles.

Assuming the RGT broke down before 5am, that's an extremely long time to
get it there.
--
Roland Perry

On 22 Sep, 06:58, Roland Perry wrote:

Assuming the RGT broke down before 5am, that's an extremely long time to
get it there.

Does the RGT operate permanently on the Underground, or is it just
hired in when required? Who was responsible for knowing the correct
procedures for recovering the train if it should fail and could not be
fixed on site, and for ensuring that those procedures were correctly
followed? was any form of emergency coupling equipment or special
tools required, and if so were they carried on the RGT or did they
have to be brought to the site from elsewhere? The BR DMU driver
training films did cover how to deal with various failures, but these
involved getting the train moving again, at least far enough to clear
the line, or being rescued by another similar train, or a steam
locomotive. This is rather different to using a normal tube train to
recover a special one-off train like the RGT. Obviously a normal tube
train driver will not have been trained in such procedures; will the
crew of the RGT, or will somebody with the specialised knowledge have
to be brought to the site to deal with it?

Who had to be informed, or give permission before the recovery could
be carried out? If the train was hired in as required, did the owners
have to be informed, approve procedures, provide equipment or
engineers before it could be moved? By it's nature this sort of work
is going to involve unusual procedures which are not carried out every
day. There will be risks involved, and care will need to be taken to
ensure that everything is done correctly.

I wouldn't be surprised if it took several hours to recover the RGT
and return it to Neasden Depot after the first failure.

It seems that the speculation in this group as to what happened after
the second failure was broadly correct, but there are still any
questions to be answered. It also does sound as if the RGT, with all
brakes isolated, an not even a hand brake capable of being operated by
those on board, was simply coupled to another train, and hauled up the
gradient towards East Finchley, but I find it difficult to believe
that this was actually done.

On 21/09/10 16:54, Paul Scott wrote:

Also the Plaistow signalling irregularity, which was quickly found to
have been caused by 'a defective component'.

ITYM 'an incorrect component'

-roy